Replacing The Staple Scrap Container - Fuji Xerox DocuCentre 9000 User Manual

14 Maintenance
5
6
7
14

Replacing The Staple Scrap Container

1
2
464
Push a new staple cartridge into
the unit.
Push the removed unit back to the
original position.
Close the Finisher's right cover.
Note • A message will be displayed and the machine will not operate if the Staple Finisher's right
cover is even slightly open.
A message is displayed when the staple scrap container is full. Follow the displayed
instruction and replace the staple scrap container.
Important • Replace the staple scrap container while the machine is on.
• When removing the staple scrap container, take care not to injure your fingers by the staple
scraps.
Note • A Staple Scrap Container is included in a Staple Cartridge
Make sure that the machine has
stopped, and then open the right
cover on the light finisher.
Remove the staple scrap container
by holding the R5 firmly.
for 100 sheets XF
.