Operational Safety - Fuji Xerox DocuCentre 9000 User Manual

1 Before Using the Machine
1

Operational Safety

22
Do not incline the product at more than 10 degree angle. Otherwise, it may fall
over and cause injuries.
Front
Front
Back
10°
Always lock the wheels of this product after installation. Otherwise, it may fall
over or slide and cause injuries.
To keep this product in a good performance and condition, always use it in the
following environment:
Temperature: 10 32
-
Humidity: 15 85%
-
When the product is left in a chilly room and the room is rapidly warmed up by
heater, dew condensation may form inside the product and cause a partial
deletion on printing.
The operator's product maintenance procedures are described in the customer
documentation supplied with this product. Do not carry out any other
maintenance procedures not described in the documentation.
This product features safety design not to allow operators access to hazard
areas. The hazard areas are isolated from operators by covers or protectors
which require a tool to remove. To prevent electric shock and injuries, never
remove those covers and protectors.
Back
Left
10° 10°
°C
Left Right
Right
10°