Fuji Xerox DocuCentre 9000 User Manual page 363

Primary Server
Set the primary server of the directory server.
1
Select [Primary Server].
2
Select the item to be set, and
select [Change Settings].
3
Set the setting value.
Primary Server Setup
You can select the primary server specification method from [By IP Address] and [By
Server Name].
Primary Server IP Address
Set the primary server IP address, using values from 0 to 255.
Note
Primary Server Name
You can set the server name for the primary server. You can enter up to 64 characters.
Note
Primary Server Port Number
Set the primary server port number in the range from 1 to 65535.
Secondary Server
Set the secondary server that is used when the primary server is not available.
1
Select [Secondary Server].
2
Select the item to be set, and
select [Change Settings].
3
Set the setting value.
Secondary Server Setup
You can select the secondary server specification method from [By IP Address] and [By
Server Name].
• You can set this when [Primary Server Setup] is [By IP Address].
• 224.XXX.XXX.XXX to 255.XXX.XXX.XXX and 127.XXX.XXX.XXX cannot be set.
• You can set this when [Primary Server Setup] is [By Server Name].
E-mail Settings
10
361