Loading Paper In Trays 6 To 7 - Fuji Xerox DocuCentre 9000 User Manual

9 Paper and Other Media

Loading Paper in Trays 6 to 7

Following describes the procedure for loading paper in the optional trays 6 to 7.
For information about changing the paper size and orientation, refer to"Changing the Size of Paper in
Trays 6 to 7" (P.279).
1
Pull out the tray towards you until it
stops.
When pulling out the paper tray,
do it slowly. If pulled out with too
much force, the tray can hit and
injure your knees.
Important • While the machine processes
2
Load and align the edge of the
paper against the right edge of the
tray with the side to be copied or
printed on facing up.
Note
3
Push the tray in gently until it comes to a stop.
9
274
Warning
a job, do not pull the tray out
that the job uses.
• Do not load paper exceeding
the maximum fill line. Doing so
might cause paper jams or
machine trouble.
M A X