Fuji Xerox DocuCentre 9000 User Manual page 114

3 Copy
Z-Fold
You can output Z-folded copies. Available paper sizes for Z-folding are B4, A3 and
11 × 17".
When loading mixed size documents, load only the documents with the same length for
the edge to be inserted. For example, load A4 portrait and A3, or B5 portrait and B4.
When you load an A4 portrait sheet with an A3 sheet, the only A3 copy will be Z-folded.
Important • This feature does not appear for some models. An optional package is necessary. For more
[Copy Output - Stapling] Screen
You can select the stapling position other than displayed on [Finishing] screen.
Important • In the following cases, the staple direction appearing on the screen and the direction in
3
None
Stapling is not performed.
1 Staple
You can select one position for stapling.
2 Staples
You can select two position for stapling.
112
information, contact our Customer Support Center.
which staples are actually stapled differ.
When the document is placed in the direction it is read (top side up) and one staple was
stapled on the top left.
When the document is placed in the left direction (left side up) and one staple was stapled
on the top left.