Fuji Xerox DocuCentre 9000 User Manual page 355

Color Space
Set the default value for [Color Space] in the [Image Quality] screen.
Important • When [Device Color Space] is selected as default and "Color Space" (P.357) is set to [Off],
For information about [Color Space], refer to "Color Space" (P.357).
Note
Original Orientation
Set the default value for [Original Orientation] when scanning.
Scan Resolution
Set the default value for [Scan Resolution] in the [Scan Options] screen.
You can select from 200 dpi, 300 dpi, 400 dpi, and 600 dpi.
Mixed Size Originals
Set the default value for [Mixed Size Originals] in the [Scan Options] screen.
Edge Erase
Set the default value for [Edge Erase] in the [Scan Options] screen. You can select from
[Normal] or [Variable Erase].
Edge Erase - Top & Bottom Edges
Set the default value for the amount of border erased from the original in the top and
bottom directions in [Edge Erase] in the [Scan Options] screen. Set a value from 0 to
50 mm, 1 mm increments.
Edge Erase - Left & Right
Set the default value for the amount of border erased from the original in the left and
right directions in [Edge Erase] in the [Scan Options] screen. Set a value from 0 to 50
mm, in 1 mm increments.
Center Erase/Binding Erase
Set the default value for the center erase amount of the original in [Edge Erase] in the
[Scan Options] screen. Set a value from 0 to 50 mm, in 1 mm increments.
Image Compression
Set the default value for [Image Compression] in the [Output Format] screen.
Note
[Auto] of [Output Color] in the [General Settings] screen does not appear.
• This feature is only supported by DocuCentre 9000 with Scanner.
• This feature is only supported by DocuCentre 9000 with Scanner.
Scan Mode Settings
10
353