Basic Copying; Reducing/Enlarging (Making Enlarged/Reduced Copies) - Fuji Xerox DocuCentre 9000 User Manual

3 Copy

Basic Copying

You can set the basic features on the [Basic Copying] screen. The following shows the
reference section for each feature.
1
On the [All Services] screen, select
[Copy].
2
Select features on the [Basic
Copying] screen that appears first.
3

Reducing/Enlarging (Making Enlarged/Reduced Copies)

You can select a ratio to make enlarged or reduced copies.
1
Select the copy ratio.
100%
Copies are made at the same size
as the document.
Auto%
The copy ratio is automatically set based upon the document and paper sizes specified
in [Paper Supply], and the document is copied to fit in the specified size.
Note
Ratio (3rd to 5th Buttons)
Select from preset ratios.
You can change the indicated ratios. For information about the setting procedures, refer to "Reduce/
Enlarge - Button 3" (P.326) and "Reduce/Enlarge - Button 4" (P.326).
64
Reducing/Enlarging (Making Enlarged/Reduced Copies)..........................................................64
Paper Supply (Selecting the Paper to Use for Copying).............................................................67
2 Sided Copying (Making 2 sided Copies) .................................................................................70
Original Type (Selecting the Image Quality Type for the Document) .......................................71
Finishing (Outputting by specifying Finishing)..........................................................................71
Multiple-Up (Copying Multiple Sheets onto One Sheet) ...........................................................71
Lighten / Darken (Adjusting the Copy Density).........................................................................72
• If you select [Auto%], specify a value other than [Auto] for [Paper Supply].