Charge Print Settings - Fuji Xerox DocuCentre 9000 User Manual

10 Setups

Charge Print Settings

1
2
3
4
Receive Control
1
2
3
10
394
Set how received print jobs should be handled.
Select [Charge Print Settings].
Select the item to be set, and
select [Change Settings].
Set the setting value.
Select [Save].
When using the authentication feature, set how to handle print jobs for which
authentication failed (the print driver did not provide the correct UserID, password, and
other authentication information).
For information about printing from a print driver, refer to "Printing" (P.256).
Note • Even if [Printer] in Login Setup/Auditron Administration is set to [Off], the setting here of
[According to Print Auditron] is not affected.
Select [Receive Control].
Select [According to Print Auditron]
or [Save All].
Select the treatment of jobs with
invalid authentication and jobs with
no UserID.
Auditron Specified
Operation follows the receiving controls set on the machine. When [According to Print
Auditron] is selected, items [Job Login Failure] and [Job without UserID] appear.
Job without UserID
Note • [
[Properties] tab > [Auditron] > [Permit Printing Without User Specification]. For information
about CentreWare Internet Services, refer to "CentreWare Internet Services" (P.253).
Jobs Login Failure
Set the action for jobs for which authentication failed.
- When [Save All] is selected, all jobs received are saved.
- When [Cancel Job] is selected, jobs received are deleted.
Jobs without UserID
Set the action for jobs with no UserID input.
- When [Save All] is selected, all jobs received are saved.
- When [Cancel Job] is selected, jobs received are deleted.
For information about where jobs are saved, refer to "Charge Print" (P.409).
] can be displayed by selecting the CentreWare Internet Services