Fuji Xerox DocuCentre 9000 User Manual page 440

13 Authentication and Auditron Administration
Remote Access
13
438
Job Flow Sheets
On the machine, even when the Login Setup/Auditron Administration feature is not
being used for copy, scan, and print, when the Authentication feature is being used on
the machine, then authentication is required for job flow sheet operation.
Print
The printing of documents stored on the machine is restricted.
This applies to charge print.
Remote access refers to using CentreWare Internet Services or EasyOperator/
ApeosWare EasyAdmin, and similar, to access the machine through a network.
The features controlled by remote access are as follows.
Print
Print directions from a computer are restricted.
To use the Authentication feature, in the print driver, the authentication information
including the UserID and password must be set.
Print data sent to the machine that fails authentication is stored on the machine or
deleted, according to the charge print settings.
Note • Not restricted when [Login/Setup Auditron] of [System Settings] is set to [Remote Access].
For information about [Remote Access], refer to "Login Setup/Auditron Mode" (P.396).
CentreWare Internet Services
On the machine, even when the Login Setup/Auditron Administration feature is not
being used for copy, scan, and print, when the Authentication feature is being used on
the machine, to access the machine with a Web browser, authentication is required.
Note • Only the system administrator is allowed access when [Login/Setup Auditron] of [System
Settings] is set to [Remote Access]. General users are not allowed access.
For information about [Remote Access], refer to "Login Setup/Auditron Mode" (P.370).
EasyOperator/ApeosWare EasyAdmin
On the machine, even when the Login Setup/Auditron Administration feature is not
being used for copy, scan, and print, when the Authentication feature is being used on
the machine, to access the machine, authentication is required.
Note • Only the system administrator is allowed access when [Login/Setup Auditron] of [System
Settings] is set to [Remote Access]. General users are not allowed access.
For information about [Remote Access], refer to"Login Setup/Auditron Mode" (P.370).