Paper Jams In Tray 5 (Bypass Tray) - Fuji Xerox DocuCentre 9000 User Manual

15 Problem Solving
3
Move the release lever 3a to
remove the jammed paper.
Note
4
Open the lever and then remove
the jammed paper.
Note
5
Push the duplex module in gently
until it comes to a stop.
6
Close the front cover.
Note

Paper Jams in Tray 5 (Bypass Tray)

Following describes how to remedy paper jams that occur on tray 5 (bypass tray).
15
1
When high capacity feeder tray is
not installed, open the top cover of
paper tray 5 (bypass tray).
2
Remove the jammed paper and all
paper loaded in paper tray 5
(bypass tray).
Important • When two or more sheets of
Note
3
Fan the paper you removed making sure that all four corners are neatly aligned.
516
• If paper is torn, check for any
torn pieces of paper inside the
machine.
• If paper is torn, check for any
torn pieces of paper inside the
machine.
• A message will be displayed and the machine will not operate if the front cover is even
slightly open.
paper are loaded, remove all
of the sheets from the tray.
• If paper is torn, check for any
torn pieces of paper inside the
machine.