Fuji Xerox DocuCentre 9000 User Manual page 83

1
Select [Edge Erase].
2
Select any item.
3
Select [Original Orientation].
Normal
The border erase amount is set to 2 mm for the top, bottom, left, and right.
Edge Erase
Refer to "When Edge Erase is selected:" (P.81).
Independent Edge Erase
Refer to "When Independent Edge Erase is selected:" (P.82).
Border Erase
Refer to"When Border Erase is selected:" (P.83).
Original Orientation
Refer to "Original Orientation (Specify the Orientation of Loaded Documents)" (P.88).
When Edge Erase is selected:
You can specify the same value for the top and bottom edges or left and right edges.
1
Select [Edge Erase].
2
Use [ ] and [
for the Edge Erase.
Top & Bottom Erase
Shadows at the top and bottom of the document are erased. Edges at the top and
bottom are erased in accordance with the direction that the document was loaded. You
can set the border erase width within the range from 0 to 50 mm in 1 mm increments.
Left & Right Erase
Shadows on the left and right of the document are erased. Edges on the left and right
are erased in accordance with the direction that the document was loaded. You can set
the border erase width within the range from 0 to 50 mm in 1 mm increments.
] to enter the value
Scan Options
3
81