Fuji Xerox DocuCentre 9000 User Manual page 312

10 Setups
3
Paper Type Priority
1
2
3
10
310
Select any of numbers 1 to 6, to
assign a tray from trays 1 to 4 and
6 to 7.
Note • Only one tray can be set to
each priority.
Set the paper type priority sequence for automatic tray selection. Automatic tray
selection means that a tray containing the appropriate paper is automatically selected
by the machine for copying or printing.
You can set any of bond paper, plain paper, recycled paper, side 2 paper, heavy paper
F, coated paper F, heavy paper F(A), and user paper types 1 to 5.
Note • Heavy paper F(B), heavy paper F(C), and heavy paper F(S) are not supported by the
machine.
The paper type setting takes precedence over the tray priority sequence.
If different paper types appear in the same priority sequence, the paper selection is
determined by tray priority sequence.
For information about the tray priority sequence, refer to "Paper Tray Priority" (P.309).
Select [Paper Type Priority].
Select the item to be set or
changed, and select [Change
Settings].
Select the priority sequence.