Fuji Xerox DocuCentre 9000 User Manual page 504

15 Problem Solving
Error Code
016-704
016-705
016-706
016-707
016-708
15
016-709
016-710
016-711
016-712
016-713
016-714
502
Category
C P S M O
[Cause]
[Remedy] Remove unnecessary documents from the mailbox, and
Refer to "Deleting Scan & Other Documents" (P.218).
[Cause]
[Remedy] Contact our Customer Support Center.
Refer to "Secure Print" (P.403).
[Cause]
[Remedy] Remove unnecessary documents stored on the printer,
For information about Secure Print, refer to "Secure Print" (P.403). For
information about mailboxes, refer to "Deleting Scan & Other Documents"
(P.218).
[Cause]
[Remedy] A feature expansion kit is needed to use the Sample
[Cause]
[Remedy] Remove unnecessary data from the hard disk to
[Cause]
[Remedy] Retry printing.
[Cause]
[Remedy] Contact our Customer Support Center.
[Cause]
[Remedy] Take one of the following actions, and resend the E-mail.
Refer to 003-751.
[Cause]
[Remedy] Enter the correct password.
[Cause]
[Remedy] Create a mailbox or specify the existing mailbox.
Cause and Remedy
Documents stored in the mailbox have reached the limit,
and hard disk capacity is insufficient.
save the document.
Security print documents cannot be registered because
of hard disk malfunction.
The maximum number of Secure Print users has been
exceeded, and no space is available on the hard disk.
and delete unnecessary Secure Print users.
Unable to sample print, because the feature expansion
kit is not installed or has malfunctioned.
Print feature. If the kit is malfunctioning, contact our
Customer Support Center.
Annotation is not possible due to insufficient hard disk
space.
increase free disk space.
An error occurred during PCL processing.
Delayed print documents cannot be registered because
of hard disk malfunction.
The configured maximum E-mail size has been
exceeded.
Decrease document pages.
Reduce [Scan Resolution].
Reduce [Scan Magnification].
Have the system administrator increase your [Maximum
Send E-mail Data Size].
The password set to the mailbox and the inputted
password were not in agreement.
Specified mailbox did not exist.