Deleting Stored Programs - Fuji Xerox DocuCentre 9000 User Manual

7 Stored Programming
1
Select [Store Build Job].
2
Select the number to register.
Note
3
Set the feature you wish to register.
Note
4
Press the <Start> button or <Clear All> button.
You can change the volume of the sound that notifies of Stored Program registration.
Refer to "Stored Programming Tone" (P.303) for configuration procedure.

Deleting Stored Programs

The following describes the procedure for deleting a registered Stored Program.
1
Select [Delete].
2
Select the number to delete.
Note
7
3
Select [Yes].
Yes
Deletes the Stored Program.
Note
No
The Stored Program delete operation is cancelled.
244
• Once a job is stored to a
button, it cannot be
overwritten.
• Select [ ] to display the
previous screen and select
[ ] to display the next screen.
• A tone is generated while
registering to job memory.
• Select [ ] to display the
previous screen and select
[ ] to display the next screen.
• Deleted Stored Programs cannot be restored.