Scanning Procedure; Step 1 Loading Documents - Fuji Xerox DocuCentre 9000 User Manual

Hide thumbs Also See for DocuCentre 9000:
Table of Contents

Advertisement

4 Scan

Scanning Procedure

This section describes basic scan operations. The following shows the scan flow and
reference sections.

Step 1 Loading Documents

There are two methods for loading documents:
Document Feeder
Document Glass
4
Document Feeder
The document feeder supports single sheet and multiple sheet documents, with sizes
ranging from 140 × 210mm (A5, A5 , 5.5 × 8.5 inches, 5.5 × 8.5 inches ) to a
maximum of 297 × 432mm (A3, 11 × 17 inches).
The document feeder can auto-detect only documents of standard sizes. For
documents that of not of a standard size, enter the size in the [Scan Size] field.
For information about entering a custom size, refer to "Scan Size (Specifying a Scanning Size)" (P.158).
Note
The document feeder accept the following number of sheets.
Lightweight paper (38-49g/m
Plain paper (50-80g/m
Heavyweight paper (81-128g/m
Heavyweight paper (129-200g/m
For information about scanning documents of mixed size, refer to "Mixed Size Originals (Scanning
Different Size Documents Simultaneously)" (P.159).
Important • Place folded or creased documents on the document glass because they may cause paper
124
Step 1 Loading Documents .......................................................................................................124
Step 2 Selecting Features ..........................................................................................................126
Step 3 Starting the Scan Job......................................................................................................128
Step 4 Confirming the Scan Job in the Job Status ....................................................................129
Step 5 Saving the Scanned Data ...............................................................................................129
Single sheet
Multiple sheets
Single sheet
Bound documents, such as books
• The standard document sizes that can be auto-detected depend on the [Paper Size
Settings] in the System Administration mode. For more information, refer to "Paper Size
Settings" (P.318)
Document Type (weight)
2
)
jams.
Number of
sheets
2
)
250 sheets
250 sheets
2
)
150 sheets
2
)
100 sheets

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Document centre 1100Document centre 900

Table of Contents