Fuji Xerox DocuCentre 9000 User Manual page 493

The image is cut off on the
edge of the paper.
No
The printed font differs
from the font specified on
the computer.
No
Printing is slow
No
The settings specified for
print options do not take
effect
No
There is no edge
Cause Image exceeds the printer's printable area.
Action Increase the printer's printable area, or decrease the
document print area.
Cause Font replacement is configured on the print driver.
Action Check the font replacement table.
Cause Non-standard fonts are used for printing.
Action Check the application or print driver settings.
If the PostScript is being used, download the required fonts.
Cause The print mode specifies Print Quality.
Action When printing image data that has image quality as a
priority, such as pictures, the print speed decreases. Turn
off the quality priority in the print mode.
Cause A print driver for another model is in use.
Action Install the print driver for this model.
Cause The optional apparatus cannot be attached to the printer.
Action Check the options attached with this printer, and reset the
printer configuration.
Cause Image exceeds the printer's printable area.
Action Increase the printer's printable area, or decrease the
document print area.
Trouble during Printing
491
15