ECLIPSE 8/ 16/ 32 Series – User Operation Manual
The remote disarming is
By default all attributes are
disabled
enabled
By pressing a digit button with corresponding number of attribute it is alternatively enabled
or disabled. The attribute is enabled when the number is visualized on the screen. The
disabled attributes are marked with "*".
LED 16 and LED 32
The remote disarming is
By default all attributes are
disabled
enabled
By pressing a digit button with corresponding number of attribute it is alternatively enabled
or disabled. The attribute is enabled when the number is lit on the display. The disabled
attributes are not lit.
LED 8
Enter at the address 17 the LED for zone 1 is blinking on the display. The digit buttons of
the enabled remote access attributes are lighting on, and the digit buttons corresponding
to the disabled attributes are off.
The final choice is confirmed by pressing the ENTER button.
5.19 Sending a "Manual test" Message
At address 18 the Manager can trigger off sending a "Manual test" message to a
monitoring station or test message with a voice dialer (when such is fitted in the controlled
panel).
It is used for testing the communicator without the need to send a technician on site.
In order to send a "Manual test" message, the Manager needs to enter his/her code:
Address
Manager code
The communicator will start an automatic sending of messages – firstly towards the
monitoring station (if there are phone numbers entered in the digital communicator) and
afterwards via the voice dialer (if there is such fitted and there are phone numbers
entered). The programming menu can be exit by pushing the CANCEL button.
5.20 Setting the Sound Level
At address 90 you can set the volume level of the keyboard buzzer. The setting is
individual for every keyboard and there are 4 different volume levels.
In order to change the volume level of the keyboard buzzer, the Manager needs to enter
his/her code first:
Reducing the volume
36