Entering Of User Names - Teletek electronics ECLIPSE 8 User's Operation Manual

Manager code
To every user code one or more areas can be assigned.
By default for User code 01 (Manager) are assigned for operation all area numbers.
Depending on the keyboard used, the visualization on screen is as follows:
LCD 32 and LCD 32 Sensitive
Areas 1, 2 and 3 are associated
By pressing the respective digit button the area is alternatively enabled or disabled. The
area is associated when the digit is visible on screen. When the area is not associated it is
market with the symbol "*".
LED 16 and LED 32
Areas 1, 2 and 3 are associated
By pressing the respective digit button the area is alternatively enabled or disabled. The
area is associated when the digit is lit on the display. The numbers of the areas that are
not associated are not lit.
LED 8
Enter at the address 07 and choose a user number- the LED for zone 1 is blinking on the
display. The digit buttons corresponding to the associated areas are on. To disable an
area press the respective number - the button is off, meaning the area is not associated.
The final choice is confirmed by pushing the ENTER button.
Note: When no areas are associated to a certain code, it is deleted from the system,
regardless if there are attributes assigned to it.

5.9 Entering of User names

This address is available when working with LCD keyboard only.
Entering user names is done at address 08, after entering manager code:
ECLIPSE 8/ 16/ 32 Series – User Operation Manual
Address
Associating area 4
Associating area 4
27
User Assigning area
number
numbers