Associating Timeslots To User - Teletek electronics ECLIPSE 8 User's Operation Manual

ECLIPSE 8/ 16/ 32 Series – User Operation Manual
Address
Entering name
Manager code
User
number
The name can be up to 16 digits long – letters, numbers and intervals.
The letters are chosen by pressing the respective digit number until reaching the desired
letter. The cursor moves automatically after choosing a letter or number or manually with
the help of the arrow buttons. If you need to enter a number, the respective button is
pressed for 2-3 second – see also item 2.8.
The final name is confirmed by pushing the ENTER button.

5.10 Associating Timeslots to User

Attention: This menu is available for ECLIPSE 32 control panel only.
From 1 to 8 timeslots for working hours can be defined in the system. Their programming
is done by Engineer. Beginning and end of the working hours, active days of the week
and possibility for including holydays are set for every time slot.
Associating timeslots to user codes is done at address 09, after entering manager code:
Address
Manager code User Number of
number timeslot
Time slot from 1 to 8 is assigned to the address. Only one time slot can be associated to
every user code.
Note:
If no time slot is associated to the code, the digit 0 is entered. This is the setting by
default.
Depending on the keyboard used, the visualization on screen is as follows:
LCD 32 and LCD 32 Sensitive
Time slot No 4 is associated
No time slot is associated
Timeslots are associated by pressing the respective digit number. The number of the
chosen timeslot is visualized on screen.
LED 16 and LED 32
28