Memory Log Review By User; Turning On The Chime Signalization By User - Teletek electronics ECLIPSE 8 User's Operation Manual

ECLIPSE 8/ 16/ 32 Series – User Operation Manual
Note: Certain users may not be permitted to change their own code. In order for users to
be allowed to change their codes, option «4.Programming» at address 06 of the
manager programming menus needs to be allowed.

4.2 Memory LOG review by User

Viewing the memory log is done at address 2 or by pressing the MEMORY button after
entering a user code:
OR
Address
User Code User Code
The events are viewed in consecutive order, one by one, from the last to first with the help
of the arrow buttons.
On the screen of LCD keyboards a text message with the event type, consecutive number
starting from 001 and date and hour are being displayed.
On the screen of LED keyboards the information about the type of event is shown in
hexadecimal form. The lit digits on the display form a code defining the event, which can
be checked in the Table of memory log events in the Appendix. By pushing button "2"
additional information about the user, zone or device is being displayed. No information
about the date and time is available when using a LED keyboard.
Notes:
The memory log can be checked also when the system is armed after entering a valid
user code.
Checking the memory log with LED 8 and LED16 keyboard is possible only by entering
address 2, because these keyboards do not have a MEMORY fast button.

4.3 Turning on the Chime signalization by User

Attention: This menu is available for ECLIPSE 8 control panel only.
The Chime signalization is a sound signal from the keyboards when opening an entry/ exit
type zone. The option can be enabled or disabled by the user. By default, the Chime
signalization is DISABLED.
To enable the Chime signalization the user first has to enter valid access code:
19