Turning On The Chime Signalization By Manager; Zones Bypassing By Manager - Teletek electronics ECLIPSE 8 User's Operation Manual

ECLIPSE 8/ 16/ 32 Series – User Operation Manual
The events are viewed in consecutive order, one by one, from the last to first with the help
of the arrow buttons.
See also the detailed description of item 4.2.

5.4 Turning on the Chime signalization by Manager

Attention: This menu is available for ECLIPSE 8 control panel only.
The Chime signalization is a sound signal from the keyboards when opening an entry/ exit
type zone. The option can be enabled or disabled by the manager. By default, the Chime
signalization is DISABLED.
To enable the Chime signalization the user first has to enter valid manager code:
Address
Manager Code
See item 4.3 for the visualization according the used keyboard.

5.5 Zones bypassing by Manager

Bypassing zones is done at address 04 or by pressing BYPASS button, after entering
manager code:
OR
Address
Manager Zone Manager code Zone
code Numbers Numbers
Note: Bypassing zones with LED 8 and LED16 keyboards is possible only by entering
address 04, because these keyboards do not have a BYPASS fast button.
See item 4.4 for the visualization according the used keyboard.
To check the bypassed zones in the system see item 3.8.
Note: Certain Managers may not be permitted to bypass zones. In order for users to
bypass zones option «3. Bypassing» at address 06 of the manager programming menus
needs to be allowed.
24