Engineer Access; Assigning User Attributes - Teletek electronics ECLIPSE 8 User's Operation Manual

ECLIPSE 8/ 16/ 32 Series – User Operation Manual

5.6 Engineer Access

Disabling engineer access (access to the engineer programming menus) is done at
address 05, after entering manager code:
Address
Manager code
By default engineer access is ENABLED.
Depending on the keyboard used, the visualization on screen is as follows:
LCD 32 and LCD 32 Sensitive
Engineer access is
Engineer access is
disabled
enabled
Press the digit buttons or arrow buttons to change alternatively the state of the parameter.
LED 16 and LED 32
Engineer access is Engineer access is
enabled disabled
Press the digit buttons or arrow buttons to change alternatively the state of the parameter.
The engineer access is allowed when all digits from 1 to 8 are lit.
LED 8
After entering the address 05, the digit buttons 1 to 9 are on – the Engineer access is
enabled. Press a random digit button or arrows to disable. The Engineer access is
disabled when the buttons from 1 to 9 are off.
The choice is confirmed by pushing the ENTER button.

5.7 Assigning User attributes

Assigning attributes to users is done at address 06, after entering manager code:
Address
Manager code Assigning
User
number
attributes
Attention:
User code 01 is Chief Manager and always has full access and assigned attributes which
cannot be changed or deleted! Option "8. Manager" is available for ECLIPSE 32 only!
Function of the user attributes:
25