Setting The Intensity Of Illumination Of The Buttons - Teletek electronics ECLIPSE 8 User's Operation Manual

Manager code
The volume levels are shown on the keyboard displays as follows:
LED 16/ 32 – Zone numbers are lit
LED 8 – Lighting on digit buttons
1
1 2
1 2 3
1 2 3 4
The choice is confirmed by pushing the ENTER button.
Note:
The sound level cannot be muted or disabled.

5.21 Setting the intensity of illumination of the buttons

At address 91 a setting for the intensity of illumination of keyboard buttons is available.
The setting is individual for every keyboard and there are 7 different levels of intensity. In
order to change the intensity, the Manager needs to enter his/her code first:
Manager code
The levels of intensity are shown on the keyboard displays as follows:
LED 16/ 32 - Zone numbers are lit
LED 8 – Lighting on digit buttons
1
1 2
1 2 3
1 2 3 4
1 2 3 4 5
1 2 3 4 5 6
1 2 3 4 5 6 7
The choice is confirmed by entering the ENTER button.
Note: The intensity of button illumination set at address 91 is seen only when the
keyboard is used (a button is pushed). If no button is pushed in an interval of 10 seconds,
the keyboard goes into standby mode, which has a default button illumination.
ECLIPSE 8/ 16/ 32 Series – User Operation Manual
Address
LCD – Number of symbols
>
> >
> > >
> > > >
Address
LCD - Number of symbols
>
> >
> > >
> > > >
> > > > >
> > > > > >
> > > > > > >
37
Increasing the volume
Volume level
Very low
Low
Medium
High
Reducing the intensity
Increasing the intensity
Intensity level
Very low
Low
Middle
Normal
Normal
High
Very high