Assigning Rights For Remote Access - Teletek electronics ECLIPSE 8 User's Operation Manual

Depending on the keyboard used, the visualization on screen is as follows:
LCD 32 and LCD 32 Sensitive
Address 16
With the help of the digit buttons enter the number of allowed incorrect codes.
LED 16 and LED 32
After entering address 16, on the display 14 blinks, while 15 and 16 are lit permanently –
the system indicates that it expects entering a number for allowed incorrect codes from
000 to 255. After entering the first digit on the display 14 and 16 are lit permanently, while
1 blinks. After entering the second digit on the display 14 and 15 are lit permanently, while
16 blinks. All 3 digits need to be entered.
LED 8
After entering address 16, on the display 1 blinks, while 2 and 3 are lit permanently – the
system indicates that it expects entering a number for allowed incorrect codes from 000 to
255. After entering the first digit on the display 1 and 3 are lit permanently, while 2 is
blinking. After entering the second digit on the display 1 and 2 are lit permanently, while 3
is blinking. All 3digits need to be entered.
The entered number is confirmed by pressing the ENTER button.

5.18 Assigning Rights for Remote Access

At address 17 the Manager assigns rights for remote access of the system. The setting is
common for all managers:
Manager code
Remote access rights:
1. REMOTE DISARM
2. REMOTE ARM
3. REMOTE CODES ACCESS
4. REMOTE PROGRAMMING
6. REMOTE ZONE BYPASS
By default all attributes are enabled.
Depending on the keyboard used, the visualization on screen is as follows:
LCD 32 and LCD 32 Sensitive
ECLIPSE 8/ 16/ 32 Series – User Operation Manual
Number from
000 to 255
Address
Allows remote disarm
Allows remote arm.
Allows remote change of user codes.
Allows remote programming of the system.
Allows remote zone bypass.
35
Assigning
rights