Appendix B - Special Symbols For Text Entering - Teletek electronics ECLIPSE 8 User's Operation Manual


83

84

85

86

87

88

89

90

91

92

93

94

95

96
(1) – The events are not sent to the monitoring software.
APPENDIX B – Special Symbols for Text Entering
Use the MEMORY
To enter a specialized symbol, move the cursor to the desired position, press the
MEMORY button (a solid cursor appears) and then using the digit buttons enter the
respective code for the symbol or letter as check in the table below.
ECLIPSE 8/ 16/ 32 Series – User Operation Manual
Fuse restore
Telephone line loss
Telephone line restore
System power up
System reset
Time change
Communication error for report to monitoring station
Report to monitoring station restore
Periphery device loss
Periphery device restore
Tamper form periphery device
Tamper form periphery device restore
Arming on "no movement" failure
User Code Changed
button to enter some special symbols and Cyrillic letters.
41
Example:
To enter the "asterisk"
symbol, first press the
MEMORY button (a solid
cursor appears on the
place) and after that enter
code 042. The asterisk
symbol will appear and the
cursor will move one
position to the right.