ECLIPSE 8/ 16/ 32 Series – User Operation Manual
Address
User Code
Depending on the keyboard used, the visualization on screen is as follows:
LCD 32 / LCD 32 Sensitive
The Chime is enabled
The Chime is disabled
Press the digit buttons or arrow buttons to change alternatively the status of the Chime.
LED 16 / LED 32
The Chime is enabled
The Chime is disabled
Press the digit buttons or arrow buttons to change alternatively the state of the Chime.
LED 8
After entering the address 3, the digit buttons 1 to 9 are off – the Chime is disabled. Press
a random digit button or arrows to enable the Chime. The Chime is enabled when the
buttons from 1 to 9 are on.
The choice is confirmed by pressing the ENTER button.
4.4 Zone bypassing by User
Every user can bypass only zones that are associated to areas he is allowed to work with
(arm and/or disarm). Bypassing zones is done at address 4 or by pushing the BYPASS
button, after a valid user code has been entered:
OR
Address
User Code
Zone
User Code
Zone
Numbers
Numbers
Note: Bypassing zones with LED 8 and LED16 keyboards is possible only by entering
address 4, because these keyboards do not have a BYPASS fast button.
20