Teletek electronics ECLIPSE 8 User's Operation Manual page 21

ECLIPSE 8/ 16/ 32 Series – User Operation Manual
Depending on the keyboard used, the visualization on screen is as follows:
LCD 32 and LCD 32 Sensitive
Zone is bypassed
Zone is not bypassed
Pushing the digit buttons or arrow buttons changes alternatively the state of the zone.
When the user chooses to bypass the zone, the BYPASS button is lit. When return to
normal operation mode, the BYPASS button is lit permanently on all keyboards.
LED 16 or LED 32
Zone is bypassed
Zone is not bypassed
Pushing the digit buttons or arrow buttons changes alternatively the state of the zone.
When the user chooses to bypass a zone the BYPASS button is lit, while digits 1 to 8 of
the display are lit permanently. After going back to normal working mode the BYPASS
button is lit permanently on all keyboards. In the LED16 keyboard BYPASS LED is lit
permanently.
LED 8
Enter at the address 4 and choose a zone number for bypass – the LED for zone 1 is
blinking on the display. If the buttons 1 to 9 are off the zone is not bypassed; if the buttons
1 to 9 are on – the zone is bypassed. To change the zone status, press a random button
or the arrows. Confirm with ENTER button. The BYPASS LED is lit permanently.
The choice is confirmed by pressing the ENTER button.
To check the bypassed zones in the system see item 3.8.
Note: Certain users may not be permitted to bypass zones. In order for users to bypass
zones option «3. Bypassing» at address 06 of the managerial programming menus
needs to be allowed.
21