Setting The Date; Blocking Remote Access Via Udl - Teletek electronics ECLIPSE 8 User's Operation Manual

ECLIPSE 8/ 16/ 32 Series – User Operation Manual

5.16 Setting the Date

Setting the date is done at address 15, after entering manager code:
Address
Manager code Date
[DD/ММ/YY]
Depending on the keyboard used, the visualization on screen is as follows:
LCD 32 and LCD 32 Sensitive
With the help of the digit buttons, enter the date in the format [DD/ММ/YY] – day, month,
year.
LED 16 and LED 32
After entering address 15, on the display 15 blinks, while 16 is lit permanently – the
system indicates that it expects entering a day from 01 to 31. Enter the day. After entering
the first digit on the display 15 is lit permanently, while 16 is blinking. After entering the
second digit of the day 15 blinks again, while 16 is lit permanently – the system indicates
that it expects entering a month from 01 to 12. The indication is the same. Only the last
two digits of the year are entered.
LED 8
After entering address 15, on the display 1 blinks, while 2, 3, 4, 5 and 6 are permanently
lit – the system indicates that it expects entering of a new date in format [DD/ММ/YY].
Enter in sequence the new date. You can review the entered date using the arrow buttons
– the set value at the respective position is indicated with a lit on digit button.
The entered date is confirmed by pushing the ENTER button.

5.17 Blocking Remote Access Via UDL

At address 16 the Manager can enter the number of allowed incorrect code (ARM /
DISARM / BYPASS / PC ID) via UDL for a period of 24 hours.
A number from 000 to 255 can be entered, while the default number of attempts is 10.
When the set number of incorrect codes is reached the system will be blocked –
communication via UDL will be impossible.
The system will be unblocked at 00:00h on the following day and communication via UDL
will be possible again.
In order to set the number of allowed incorrect codes, the Manager needs to enter his/her
code:
Address
Number from
Manager code
000 to 255
34