Assigning Attributes For User Proxy Card - Teletek electronics ECLIPSE 8 User's Operation Manual

No time slot is associated
Timeslots are associated by pressing the respective digit number. The number of the
chosen timeslot is lit permanently.
LED 8
Enter at the address 09 and choose a user number - the LED for zone 1 is blinking on the
display. The digit button corresponding to the associated timeslot is on. By default the
digit button 0 is on. To set other timeslot number you have to press the corresponding
digit button.
The final choice is confirmed by pushing the ENTER button.

5.11 Assigning Attributes for user proxy card

At this address the manager sets rights to user cards for arming/ disarming the system via
proxy reader built-in in a keyboard.
The settings of this address do not concern the arming and disarming via stand-
alone proxy reader.
Assigning attributes for work with proxy reader is done at address 10, after entering
manager code:
Manager code
User attributes for work with a proxy reader:
1. Disarming
2. Arming attributes
3. Arming attributes
Notes:
Only one arming mode can be used with every proxy card.
By default, all users are allowed to arm and disarm the system in SLEEP ARM mode.
ECLIPSE 8/ 16/ 32 Series – User Operation Manual
Time slot No 4 is associated
Address
Disarming all areas associated to this user.
Parameters 2 and 3 are set in a certain combination for
determining the options for arming with a proxy reader. The
options are related with the type of arming mode.
Choose a combination between options 2 and 3 depending on
the type of arming mode, which will be used:
2 3 Arming mode
 
Arming is not allowed

3 FULL ARM

2 STAY ARM
2 3 SLEEP ARM
29
Assigning
User
number attributes