Exabyte 230D Library Installation And Operation Manual page 276

Appendix E
Refer to the figure on the next page and pack the library as follows:
262
The rack-mount library weighs 170 – 200 pounds
(77 – 91 kg). You must use a mechanical lift to
move the rack-mount library.
For the rack-mount model, lower the library to the foam piece
on the cushioned pallet. For the standalone model, unfold the
ramp that extends from the cushioned pallet. Roll the library
into place.
You do not need to lock the wheels to ship the
standalone model. Leave the wheel locks in an
unlocked (up) position.
Place the plastic ESD bag and the cardboard sleeve over the
library, as shown in the figure on the following page. Make
sure to leave the ramp outside the sleeve.
Exabyte 230D