Exabyte 230D Library Installation And Operation Manual page 127

To clean the tape drive from the operator panel:
Installation and Operation
If security has been enabled, disable it (see
Switch to LCD mode (see
Make sure a cleaning cartridge is installed in the fixed
cartridge slot.
drive, make sure the fixed slot contains a cleaning
cartridge (rather than a data cartridge). If the fixed
slot contains a data cartridge, the Clean Tape Drive
command will fail, and you will have to manually
unload the cartridge from the drive (see
From the Maintenance Menu, select Tape Drive Command
Menu, then Clean Tape Drive.
To clean Tape Drive 1, press
the following softkeys:
page 95).
Before you begin cleaning a tape
. To clean Tape Drive 2, press
Tape Drive Operation
page 73).
page 109).
113