Table of Contents
Advertisement
Ensure that the environment is free of conditions that could cause
electrostatic discharge (ESD). If possible, use a grounded static
protection wristband during installation. If a wristband is not
available, touch a known grounded surface, such as the library's
metal chassis.
If the tape drive contains a cartridge, you must unload the
cartridge as described in this section.
Installation and Operation
Do not mix DLT 4000, DLT 7000, or DLT 8000 tape
drives in the library. Make sure both tape drives
are the same type and model.
Do not open the library door and attempt to
unload the tape drive using the Unload button on
the faceplate of the tape drive. Pressing the
Unload button does not eject the cartridge — the
tape drive handle is still " closed."
Do not attempt to open the tape drive manually
by turning the handle. Manually turning the
handle to open or close the tape drive can
damage the tape drive and may cause injury.
Routine Service
133
Advertisement
Table of Contents
Need help?
Do you have a question about the 230D Library and is the answer not in the manual?
Questions and answers