Exabyte 230D Library Installation And Operation Manual page 235

The library is shipped with a seven-foot (2.1 meter), 18 AWG,
3-conductor AC power cord for 120 volt use in the United States
and Canada. The power cord has a molded NEMA 5-15P male
connector on one end and a molded IEC 320 female connector on
the other end. The power cord is UL Listed and CSA Certified.
If you are planning to use an input voltage other than 120 volts
AC or if you plan to use the library outside of the United States or
Canada, you must supply your own power cord.
Installation and Operation
It must have a molded NEMA 6-15P attachment plug on one
end.
It must have a molded IEC 320 female connector on the other
end.
The cordage must be an SJT or SVT type, 3-conductor, 18 AWG
minimum.
The power cord must comply with local electrical code.
It must have an attachment plug of the proper type, rating,
and safety approval for the intended country.
It must have an IEC 320 female connector on one end.
The cordage must be adequately rated and harmonized to
CENELEC publication HD-21.
Specifications
221