Table of Contents
Advertisement
Ensure that the environment is free of conditions that could cause
electrostatic discharge (ESD). If possible, use a grounded static
protection wristband during installation. If a wristband is not
available, touch a known grounded surface, such as the library's
metal chassis.
Installation and Operation
Do not mix DLT 4000, DLT 7000, or DLT 8000 tape
drives in the library. Make sure both tape drives
are the same type and model.
Turn the library's power switch to off.
Disconnect the power cord.
Before performing this installation or maintenance
procedure, be sure that the library power switch is
in the off position and that the pow er cord is
disconnected from the library and the outlet.
Library Upgrades
143
Advertisement
Table of Contents
Need help?
Do you have a question about the 230D Library and is the answer not in the manual?
Questions and answers