Table of Contents
Advertisement
The SCSI terminator must match the SCSI bus configuration (that
is, single-ended, HVD or LVD, and wide or narrow). In addition,
all termination must be external. Do not use internal terminators
to terminate the library or the tape drives.
To ensure proper performance of the library and tape drive,
Exabyte recommends one of the following external terminators:
Exabyte testing has shown that older passive termination does not
provide rising edge transitions that are fast or clean enough at fast
SCSI speeds.
Installation and Operation
Narrow
Single-ended
HVD
Wide
Single-ended
LVD
HVD
For best results on a single-ended bus, use active
termination.
AMP Amplimite 749535-2 (passive)
AMP Amplimite 750381-1 (active)
AMP Amplimite 749541-1
AMP Amplimite 869516-1(active)
AMP Amplimite 796051-1
AMP Amplimite 869515-1
Specifications
225
Advertisement
Table of Contents
Need help?
Do you have a question about the 230D Library and is the answer not in the manual?
Questions and answers