Exabyte 230D Library Installation And Operation Manual page 221

To create a library or Ethernet diagnostic listing via FTP:
Installation and Operation
If necessary, connect the Ethernet cable to the library and the
host computer (see
From your host computer, activate the FTP utility you are
going to use to send the diagnostic buffer information from
the library to the host computer.
Make sure the FTP file transfer type is set to ASCII.
Use the FTP command for your utility to get the diagnostic
listing, as follows:
For a library diagnostic listing, get
For an Ethernet diagnostic listing, get
If necessary, specify a destination location (path and filename)
for the diagnostic listing.
page 200).
libtrace.txt.
Library Firmware
etrace.txt.
207