Exabyte 230D Library Installation And Operation Manual page 137

The library uses a 4.0 amp, 250-volt fuse, which is located in the
fuse drawer at the back of the library above the power cord
connector. An extra fuse is provided in the fuse drawer. To order
additional fuses, contact Exabyte
To replace the fuse:
.
Installation and Operation
When replacing the library's fuse, use only the
same type and rating of fuse.
Turn off the library and remove the power cord.
Before performing this installation or
maintenance procedure, be sure that the library
power switch is in the off position and that the
power cord is disconnected from the library and
the outlet.
Routine Service
(See the inside back cover).
123