Exabyte 230D Library Installation And Operation Manual page 205

Before accessing the console interface, you must set up the
following hardware and software environment:
Installation and Operation
Host computer that uses an RS232 serial port.
A straight-through 9-pin serial cable (not a null modem cable).
New firmware for the library or Ethernet card. You can
download new firmware from Exabyte's web site
(www.exabyte.com), or you can contact Exabyte Technical
Support to request firmware on a diskette.
Software that has the following options set (if applicable):
Port setting: Data bits
Port setting: Parity
Port setting: Stop bits
Port setting: Flow control
Function, arrow, and control keys act as
Emulation
Data transfer protocol (for writing)
Font
Baud rate
Library Firmware
8
None
1
None
Terminal keys
ANSI
XMODEM
Terminal
CHS Terminal supports
up to 19,200 bps
191