Use the table below as a checklist to make sure you have all the
accessories and equipment needed for library operation. Many of
these items are included in the library accessory box.
Installation and Operation
Power cord (U.S. and Canada
only)
Six Exabyte DLT Data Cartridge
Magazines
Data cartridge magazine cover
Set of magazine labels and
cartridge slot labels
Keys for the door lock
Cleaning packets for the library
door
SCSI cables (one host cable
and two library jumper cables)
SCSI bus terminator (required
if the library or one of the tape
drives is the last device on the
bus)
Data cartridges
Cleaning cartridges
Installation and Setup
Included with the library. (For
power cord specifications for
other voltages and international
use, see
page
221.)
Included with the library.
If these items are not included with
the library, contact Exabyte to
purchase them. If you want to use
your own, see
Appendix A
specifications.
If these items are not included with
the library, contact Exabyte to
purchase them. If you want to use
your own, refer to
page 97
appropriate data cartridges and to
page 81
for appropriate cleaning
cartridges.
for
for
13
Need help?
Do you have a question about the 230D Library and is the answer not in the manual?
Questions and answers