4.7 Configuration [1]
Value Range
Not applicable.
Programming References
4.7.6 Slot [1-1] DPH Card Property
Feature Guide References
None
4.7.8
Slot [1-1] Card Command
Commands for the service cards can be programmed.
INS
Puts the card in service.
Default
Not applicable.
Value Range
Not applicable.
Programming References
4.7.1 Slot [1-1]
Feature Guide References
None
OUS
Takes the card out of service. This enables a temporal non-use of the card, for example, for the purpose of
repair.
Default
Not applicable.
Value Range
Not applicable.
Programming References
4.7.1 Slot [1-1]
Feature Guide References
None
332
Feature Guide