K Toner Auger Removal - Lexmark X95x series Service Manual

7558-xxx

K toner auger removal

Remove the printer front door. See
1.
2. Remove the transfer belt cleaner. See
Remove the waste toner box.
3.
Remove the four photoconductor units.
4.
Remove the four toner supplies.
5.
Remove the operator panel front cover. See
6.
7. Remove the printhead retract door. See
Remove the inner cover. See
8.
Remove the inner plate. See
9.
Lift the plastic gate, and push it in to prevent the toner from spilling.
10.
Squeeze the two latches (A) to release the upper part of the auger.
11.
Detach the lower portion (B) of the auger from the developer unit.
12.
Service Manual
4-100
"Printer front door removal" on page
"Transfer belt cleaner removal" on page
"Operator panel front cover (MFP) removal" on page
"Printhead retract door removal" on page
"Inner cover removal" on page
"Inner plate removal" on page
4-13.
4-178.
4-145.
4-4.
4-98.
Previous
Next
4-8.
Go Back