Flatbed Scanner Assembly Removal - Lexmark X95x series Service Manual

Remove the FB CCD sensor assembly.
6.

Flatbed scanner assembly removal

1. Remove the rear upper cover. See
Remove the ADF assembly. See
2.
page 4-224.
Remove the scanner rear cover. See
3.
Remove the operator panel left cover. See
4.
Remove the operator panel right cover. See
5.
6. Remove the scanner right cover. See
Remove the scanner left cover. See
7.
Remove the operator panel. See
8.
Remove the five screws (A) from the right side of the printer.
9.
"Rear upper cover removal" on page
"Automatic document feeder (ADF) assembly removal" on
"Scanner rear cover removal" on page
"Operator panel left cover removal" on page
"Operator panel right cover removal" on page
"Scanner right cover removal" on page
"Scanner left cover removal" on page
"Scanner controller PCBA removal" on page
A
7558-xxx
4-19.
4-20.
4-10.
4-11.
4-21.
4-19.
4-235.
Repair information
4-227
Previous
Next
Go Back