Sensor (Tray Module Feedout) Removal - Lexmark X95x series Service Manual

7558-xxx

Sensor (tray module feedout) removal

This removal procedure applies to all three tray modules.
Open the left door.
1.
Remove the two screws (A) securing the metal guide to the machine.
2.
Remove the metal guide.
3.
Remove the tray module upper media transport roller. See the
4.
on page 4-283.
Remove the screw (B) securing the plastic bracket to the machine.
5.
Service Manual
4-270
"Tray module transport rollers removal"
Previous
Next
Go Back