Hcf Separation Roll Assembly Removal - Lexmark X95x series Service Manual

7558-xxx
Remove the separation gear - 25 tooth (F).
9.

HCF separation roll assembly removal

Open the HCF top door.
1.
2. Open the HCF feed unit assembly.
Push the two ends of the HCF separation roll assembly (A) inward, and move it upward in the direction of
3.
the arrow to release it from the HCF media feed unit assembly (B).
Remove the HCF separation roll assembly (A).
4.
Note: When removing the HCF separation roll assembly (A), do not touch the rubber surface.
Front
Note: Before re-installing the HCF separation roll assembly (A), do not touch the rubber surface.
Service Manual
4-442
B
A
B
C
F
A
E
D
E-clip
Previous
Next
Go Back