Lexmark X95x series Service Manual page 886
Hide thumbs
Also See for X95x series:
- Service manual (1182 pages) ,
- Administrator's manual (79 pages) ,
- Manual (45 pages)
Table of Contents
Advertisement
7558-xxx
Remove the belt (buffer/transport) (D) from the stepper motor (buffer/transport).
5.
Second
Disconnect the connector from the stepper motor (buffer/transport).
6.
7.
Remove the two screws securing the bracket (E) to the finisher.
Remove the bracket.
8.
Remove the two screws securing the stepper motor (buffer/transport) to the bracket.
9.
Remove the stepper motor (buffer/transport).
10.
Remove the belt (buffer/transport) (D).
11.
Reinstallation notes:
•
The tension of the belt (buffer/transport) (D) is automatically adjusted by the force of the spring attached to
the belt tensioner bracket (C).
Service Manual
4-412
C
C
First
Connector
A
D
Previous
Next
Go Back
Advertisement
Table of Contents
