Lvps Front Fan Guide Removal - Lexmark X95x series Service Manual

Remove the drive belt.
19.
Re-installation tip: To make the reinstallation of the lower redrive shift motor assembly easier, ensure that the
drive belt is placed on the lower redrive shift motor assembly drive pulley and that the plastic motor cover is
attached to the lower redrive shift motor assembly as you reattach it to the machine. This will prevent the drive
belt from slipping. After you have reattached the lower redrive shift motor assembly to the machine, you will
need to remove the plastic motor cover to replace both screws, and then reattach the motor cover.

LVPS front fan guide removal

Remove the rear upper cover. See
1.
2. Remove the rear lower cover. See
Remove the printer right over. See
3.
4. Remove the two screws (A) securing the LVPS front fan guide to the machine.
"Rear upper cover removal" on page
"Rear lower cover removal" on page
"Printer right cover removal" on page
7558-xxx
4-19.
4-17.
4-14.
Repair information
4-111
Previous
Next
Go Back