Release the two hooks (F) securing the developer HVPS PCBA to the machine.
8.
9.
Remove the developer HVPS PCBA.
Feeder slide guide removal
Remove the appropriate feeder unit. See
1.
media feeder removal" on page
tray 3 feeder removal" on page
Slide the plastic rail to detach the two tabs (A) securing the feeder slide guide to the assembly.
2.
Detach the harness from the clamp (B).
3.
Remove the feeder slide guide.
4.
"Printer tray 1 feeder removal" on page
4-278,
"TTM tray 4 media feeder removal" on page
4-287.
7558-xxx
4-144,
"Tray module
4-291, or
"TTM
Repair information
4-77
Previous
Next
Go Back