Sensor (Fuser Exit) Lag Jam; Sensor (Upper Redrive) Static Jam - Lexmark X95x series Service Manual

7558-xxx
Step Action and questions
Check the fuser/lower redrive/1st
8
transfer retract motor for proper
operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch Fuser/lower redrive/
1st transfer retract motor.
Does the above component
operate properly?
Check the fuser/lower redrive/1st
9
transfer retract motor for proper
connection.
Is the above component
properly connected?
Perform a print test. Go to
10
"PRINT TESTS" on page
Does the error continue?

202.05 Sensor (fuser exit) lag jam

See
"202.04/202.05 Sensor (fuser exit) lag jam" on page

203.01 Sensor (upper redrive) static jam

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the sensor (upper redrive)
2
for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch PRINTER SENSOR
TESTS.
4. Touch Sensor (upper
redrive).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Service Manual
2-106
Yes
Go to step 8.
Replace the fuser/lower redrive/
1st transfer retract motor.
Go to
"Fuser/lower redrive/1st
BTR retract motor removal" on
page 4-97.
Replace the upper printer engine
card assembly.
3-25.
Go to
"Upper printer engine
PCBA removal" on page
Yes
Go to step 2.
Go to step 4.
No
Go to step 9.
Replace the connection.
Problem resolved
4-186.
2-104.
No
Remove any media or media
fragments.
Go to step 3.
Previous
Next
Go Back