Media Eject Motor Assembly Removal - Lexmark X95x series Service Manual

7558-xxx
Remove the screw securing the spring clamp (D) to the finisher.
7.
8. Remove the spring clamp (D).
Remove the media eject clutch actuator (C).
9.
10. Remove the media eject clamp clutch (B).
Installation note: Make sure the hook on the media eject clamp clutch is placed in the notch of the bracket.

Media eject motor assembly removal

Remove the rear upper cover. See
1.
Remove the media eject clutch. See
2.
3. Disconnect the connector from the media eject motor assembly (A).
Disconnect the connector from the sensor (media bin level 2) (B).
4.
Service Manual
4-366
A
Connector
B
Notch
B
"Rear upper cover removal" on page
"Media eject clamp clutch removal" on page
Clamp
D
Connector
C
4-377.
4-365.
Previous
Next
Go Back