7558-xxx
Front left cooling fan removal
Remove the printer front door. See
1.
2.
Remove the transfer belt cleaner. See
Remove the waste toner box.
3.
Remove the four photoconductor units.
4.
Remove the four toner supplies.
5.
Remove the operator panel front cover. See
6.
7.
Remove the printhead retract door. See
Remove the inner cover. See
8.
Remove the inner plate. See
9.
Remove the waste toner auger chute. See
10.
Release the two latches securing the plastic bracket to the machine, and remove the plastic bracket.
11.
Release the clamp (A) securing the cable connected to the fan.
12.
Service Manual
4-78
"Printer front door removal" on page
"Transfer belt cleaner removal" on page
"Operator panel front cover (MFP) removal" on page
"Printhead retract door removal" on page
"Inner cover removal" on page
"Inner plate removal" on page
"Waste toner auger chute removal" on page
4-13.
4-178.
4-145.
4-4.
4-98.
Previous
Next
4-8.
Go Back
4-191.